Service Hotline
0534-6137288
Service Hotline
0534-6137288
Product features:
1. Equipped with stepper motor and standard DB9 interface, with motion controller can realize automatic control.
2. Repeated positioning accuracy is 0.005mm, equipped with handwheel to facilitate manual adjustment after power failure.
3. Both ends are equipped with limit switch and zero switch, convenient to determine the position and protect the product.
4. Base and table have standard hole pitch threaded hole and through hole, easy to install and fix.
5. The rotating shaft is made of bearing steel, with high precision, large bearing capacity and long service life.
| 技術指標 | ||||
| 調整維度 | XYZ軸 | θX | θY | θZ |
| 行程 | XY：30mm、Z：15mm | 360° | ±10° | ±15° |
| 臺面尺寸 | 130*100mm | |||
| 分辨率 | 0.000625mm | 0.00125° | 0.00032° | 0.00045° |
| 軸向間接 | 0.02mm | ---- | ---- | ---- |
| 傳動比 | 180:1 | 352:1 | 252:1 | |
| 最大速度 | 10mm/S | 25°/S | 5°/S | 7°/S |
| 標配電機 | 42步進電機 | |||
| 額定電流 | 1.7A | |||
| 重復定位精度 | 0.005mm | 0.005° | 0.0043° | 0.0047° |
| 中心負載 | 3.5kg | |||
| 自重 | 7kg | |||
產品實拍
