Product features:
1. Standard equipped with stepper motor and standard RS232 interface, can increase the photoelectric zero, with HGC series motion controller can achieve automatic control;
2. The rotating shafting is made of bearing steel, with high precision, large bearing capacity and long service life;
3. Worm wheel and worm structure is adopted for transmission, and the table can be rotated freely;
4. The worm wheel and worm are carefully grinded and matched to make the movement comfortable and the air return is very small;
5. Cleverly designed clearance elimination structure can adjust the clearance caused by long-term use;
6. The diameter of the center through hole is limited by tolerance, and the center of the through hole coincides with the rotating center for convenient positioning;
7. Stepper motor and worm are connected by imported high-quality elastic coupling, synchronous transmission and low noise;
8. The outer ring of the table is a scale ring, and the circle can rotate relative to the table to facilitate reading and initial positioning;
9. Replaceable servo motor, suitable for industrial applications.
產品技術參數:
產品型號 | HGRA145 | HGRA160 | HGRA1100 | HGRA1200 | HGRA1400 |
臺面直徑(mm) | 45 | 60 | 100 | 200 | 400 |
傳動比 | 90;1 | 180;1 | 720;1 | ||
重復定位精度 | <0.01° | <0.005° | <0.003° | ||
標配電機 | 42步進電機(1.8°) | 57步進電機(1.8°) | |||
最大靜轉矩 | 0.4Nm | 1.2Nm | |||
定額工作電流 | 1.7A | 2.8A | |||
最大速度 | 50°/sec | 25°/sec | 5°/sec | ||
分辨率(8細分) | 0.0025° | 0.00125° | 0.0003125° | ||
中心通孔直徑(mm) | φ8.5+0.025 | 無 | φ46+0.025 | φ90+0.025 | 無 |
標配零位 | 無 | 無 | 有 | 有 | 無 |
中心最大負載 | 15kg | 30kg | 50kg | 60kg | 80kg |
自重 | 0.65kg | 1kg | 1.54kg | 7.7kg | 19.75kg |
產品實拍
可配我是運動控制器使用!