Service Hotline
0534-6137288
Service Hotline
0534-6137288
HGAA601 precision six - dimensional electric displacement table
HGAA601 precision six - dimensional electric displacement table
Product features:
1. Equipped with stepper motor and standard DB9 interface, with motion controller can realize automatic control.
2. Repeated positioning accuracy is 0.005mm, equipped with handwheel to facilitate manual adjustment after power failure.
3. Both ends are equipped with limit switch and zero switch, convenient to determine the position and protect the product.
4. Base and table have standard hole pitch threaded hole and through hole, easy to install and fix.
5. The rotating shaft is made of bearing steel, with high precision, large bearing capacity and long service life.
| 技術指標 | ||||
| 調整維度 | XYZ軸 | θX | θY | θZ |
| 行程 | XY：30mm、Z：15mm | 360° | ±10° | ±15° |
| 臺面尺寸 | 130*100mm | |||
| 分辨率 | 0.000625mm | 0.00125° | 0.00032° | 0.00045° |
| 軸向間接 | 0.02mm | ---- | ---- | ---- |
| 傳動比 | 180:1 | 352:1 | 252:1 | |
| 最大速度 | 10mm/S | 25°/S | 5°/S | 7°/S |
| 標配電機 | 42步進電機 | |||
| 額定電流 | 1.7A | |||
| 重復定位精度 | 0.005mm | 0.005° | 0.0043° | 0.0047° |
| 中心負載 | 3.5kg | |||
| 自重 | 7kg | |||
產品實拍
HGAM3 series 3D manual displacement table
HGAM3 series 3D manual displacement table
Characteristics of 3d manual displacement table:
1. The guide rail is cross roller with V-shaped steel guide rail, with higher accuracy, larger load bearing and long service life.
2. Drive: the micrometer head is placed in the center of the translation table, convenient operation.
3. Use spring return to eliminate axial clearance.
4. Mounting holes with standard hole spacing are distributed on the table and base for easy installation and combination.
產品實拍
HGVM0 series manual lifting platform
HGVM0 series manual lifting platform
Product features:
1. Guide rail is imported high-quality linear ball bearing pair;
2. Double guide rail over positioning structure to ensure smooth and comfortable movement, high precision;
3. Micrometer head external direct drive, convenient operation, quantitative reading;
4. The table has standard connection hole, easy to fix the connection, more 12mm diameter long hole, can be directly fixed HGMP series support rod.
產品實拍
HGRA1 series turbine electric rotary table
HGRA1 series turbine electric rotary table
Product features:
1. Standard equipped with stepper motor and standard RS232 interface, can increase the photoelectric zero, with HGC series motion controller can achieve automatic control;
2. The rotating shafting is made of bearing steel, with high precision, large bearing capacity and long service life;
3. Worm wheel and worm structure is adopted for transmission, and the table can be rotated freely;
4. The worm wheel and worm are carefully grinded and matched to make the movement comfortable and the air return is very small;
5. Cleverly designed clearance elimination structure can adjust the clearance caused by long-term use;
6. The diameter of the center through hole is limited by tolerance, and the center of the through hole coincides with the rotating center for convenient positioning;
7. Stepper motor and worm are connected by imported high-quality elastic coupling, synchronous transmission and low noise;
8. The outer ring of the table is a scale ring, and the circle can rotate relative to the table to facilitate reading and initial positioning;
9. Replaceable servo motor, suitable for industrial applications.
產品技術參數：
| 產品型號 | HGRA145 | HGRA160 | HGRA1100 | HGRA1200 | HGRA1400 |
| 臺面直徑（mm） | 45 | 60 | 100 | 200 | 400 |
| 傳動比 | 90;1 | 180;1 | 720;1 | ||
| 重復定位精度 | ＜0.01° | ＜0.005° | ＜0.003° | ||
| 標配電機 | 42步進電機（1.8°） | 57步進電機（1.8°） | |||
| 最大靜轉矩 | 0.4Nm | 1.2Nm | |||
| 定額工作電流 | 1.7A | 2.8A | |||
| 最大速度 | 50°/sec | 25°/sec | 5°/sec | ||
| 分辨率（8細分） | 0.0025° | 0.00125° | 0.0003125° | ||
| 中心通孔直徑（mm） | φ8.5+0.025 | 無 | φ46+0.025 | φ90+0.025 | 無 |
| 標配零位 | 無 | 無 | 有 | 有 | 無 |
| 中心最大負載 | 15kg | 30kg | 50kg | 60kg | 80kg |
| 自重 | 0.65kg | 1kg | 1.54kg | 7.7kg | 19.75kg |
產品實拍
可配我是運動控制器使用！
HGIM250 biaxial tilt table
HGIM250 biaxial tilt table
HGIM250 biaxial tilt table
Provide biaxial tilt adjustment;
★M8X0.5 fine tooth screw drive, high quality spring reset, large adjustment Angle, good stability;
★ Point, line and surface structure design, stable, good repeatability;
★ Installation mode: can be directly placed and used or four M6 screws with countersunk hole conversion installation;
★ It is suitable for the large size load which needs 2-d fine tuning. The four mounting holes can be connected to the support rod or plate parts of our company, and the whole is fixed on the optical platform for precise adjustment.
產品圖片
HGVM0 series manual shear lifting platform
HGVM0 series manual shear lifting platform
Product features
★ Used for large stroke, non-quantitative, large load lifting adjustment;
★ Adopt scissor lifting support, fine grinding screw drive, double guide rail and five axis over positioning mechanism, ensure smooth and comfortable movement, high precision, large load bearing;
★ The upper and lower sides of porous design, strong applicability, can be used as mounting surface;
產品參數
| 產品型號 | HGVM0160 | HGVM0160R | HGVM02120 |
| 行程 | 60mm | 60mm | 120mm |
| 靈敏度 | 0.01mm | 0.01mm | 0.01mm |
| 臺面尺寸 | 80*120mm | 80*120mm | 140*220mm |
| 負載 | 20kg | 20kg | 25kg |
| 自重 | 1.15kg | 1.15kg | 3.5kg |
| 標尺 | 無 | 有 |
實拍圖片
